admin
Admin
Admin
| Posts: 138 |  |
|
Agilent MSDchemstation...problem with recalibratio - 2005/11/28 17:12
Hi!
I use Agilent MSDchemstation version D and i have a problem when i recalibrate my calibration table.
If i choose replace option for response factor and for retention time,the chemstation don't replace the response factor.If i repeat the recalibration procedure for a second time,that's ok.
if i replace only response factor and don't update retention time,the recalibration is ok immediatly.
do you have this problem and do you have found the solution?
Thanks!
Post edited by: admin, at: 2005/11/28 17:41
|
Chorma Forum 
